Toolbox Meetings (198)

At Stallion Safety Consulting we believe that the more information that a company has, the better choices they make.   So all these toolbox meetings are free to you & employees.

We have created toolbox meetings with a topic of discussion.  So all you need to do is print them off and review with your crew.  
Filter Close
Add to CompareAdded to Compare
Quick View

Inhalation Hazards from Welding Toolbox Meeting

Welding releases toxic fumes, gases, and vapours into the air. Breathing in these contaminants can make you sick if you do not take steps to protect yourself. In confined spaces, welding fumes and gases can...

$0.00
Add to CompareAdded to Compare
Quick View

Sun Protection Toolbox Meeting

At some point, we have all been burned by the sun.  Sunburn is the effect of ultraviolet (UV) radiation on the skin.  When you work in the sun, especially in the spring and summer, you need...

$0.00
Add to CompareAdded to Compare
Quick View

Solvents Toolbox Meeting

Solvents are often used with paints, lacquers, varnishes, adhesives, thinners, degreasers, cleaners, glues, and mastics. You can be exposed—and overexposed—to solvents in various ways. 1. Absorption—the solvent penetrates your skin. This could be through direct...

$0.00
Add to CompareAdded to Compare
Quick View

Propane Safety Toolbox Meeting

Explosion and asphyxiation are the main risks with propane.  Here are some safety tips to help keep your workers safe while working with propane. Format: docs Pages: 3 

$0.00
Add to CompareAdded to Compare
Quick View

Circular Saws Safety Toolbox Meeting

The circular saw is one of the most widely used portable power tools on construction sites. If not used correctly, it can cause serious injuries. Format: doc Pages: 3 

$0.00
Add to CompareAdded to Compare
Quick View

Electrical Drills Safety Toolbox Meeting

If you push a tool beyond its capacity, you can burn out the motor and injure yourself. Leaning into a drill and pushing too hard is dangerous. If you lose balance or control, you can...

$0.00
Add to CompareAdded to Compare
Quick View

Basic Electrical Tool Safety Talk

Using electricity on site can be dangerous. Contact with electrical current can cause electrocution, shock, and burns. Electricity can also cause your muscles to contract, which can lead to a fall. Take special care when...

$0.00
Add to CompareAdded to Compare
Quick View

Screwdrivers Toolbox Meeting

More than any other tool, the screwdriver is used for jobs it was never meant to do. When used improperly, workers have suffer injuries.   Format: doc Pages: 3 

$0.00
Add to CompareAdded to Compare
Quick View

Pliers & Wrenches Toolbox Meeting

Injuries with hand tools are not often serious, but they can be severe enough to send you to the hospital and make you lose time from work. Common causes include using the wrong tool, using...

$0.00
Add to CompareAdded to Compare
Quick View

Needlesticks & Sharp-objects Injuries Toolbox Meeting

Occasionally workers may encounter needles, syringes, or razors on the job. Certain workplaces may be at a higher risk of encountering these types of hazards. Format: doc Pages: 3

$0.00
Add to CompareAdded to Compare
Quick View

Mould Toolbox Meeting

Moulds can be a health hazard in buildings that are already built or under construction. Some moulds are toxic. Touching them—or breathing in their spores—can be harmful.  Please share these tips on how to protect...

$0.00
Add to CompareAdded to Compare
Quick View

Carbon Monoxide Toolbox Meeting

Carbon monoxide is a clear, colourless gas you cannot smell or taste. It is dangerous because it interferes with your body’s ability to use oxygen. Even in small doses, CO can kill you. The first...

$0.00
loading......